JDGD-16

JDGD-17

JDGD-18

JDGD-19

Housing
Made from #304 stainless steel sheet and
sharp angles and protrusions completely
eliminated, it gives users the max protection
against hurt. Meanwhile, dust/ waterproof
hinged locked cover provides maximum
access to the controller and other
mechanism, thus easy to debug and
maintain if any problems occur. Finally, the
support is equipped for optional access
control devices, such as card reader,
fingerprint reader, facial recognition system

Safety
A series of optical photocells are used to monitor all
the pedestrian. The gate will not close until
pedestrians leave. Any attempts to defraud such as
intrusion, wrong-way and tailgating will trigger alarm
signal. Anti-pinch and anti-collision functions are
provided by the gate, if there is any obstacle in the
channel when closing, the motor will automatically
stop working within specified time and the baffle
will reset again after default delay. In case of power
failure or in an emergency, the gate will open to
release the passage.

Drop-arm mechanism
The passage must be opening to meet special
requirement in special condition, such as power
failure, emergency (e.g fire-fighting)Jayda tripod
turnstiles allow the gate to put down the arms to
pass freely.

Control Board
DIP switch is equipped on the control
board, by which users are able to program
the operational status freely, e.g. work
mode, open/close time, etc. There are some
LED indicators on the controller which
indicate working status, by which users are
easy to find out problems and solutions.

High Integration
Jayda tripod turnstiles are equippedwith standard
interfaces for connection with different access control
systems. Because of wide integration,users are free
to use different access devices to customize special
turnstile systems.

  • Made of high quality #304stainless steel
  • LED lane status and direction indicator lights
  • Built-in intelligent PLC controller
  • Easy integration with any type of identification or authorization system
  • Unidirectional or bi-directional pass
  • Auto open and free access when power off
  • Traffic light indicator
  • The passage will be locked up again if pedestrain does not pass in valid time;
    The valid passing time can be set up from PLC controller
Housing Material304 stainless sheet
Dimensions1400x280x1000mm
Start-up time0.2 seconds
DirectionUnidirectional or bi-directional pass
Working EnvironmentIndoor or outdoor
IP RateIP45
Pass Speed30-35 persons per minute
Life cycle>3 million times
Working TemperatureIndoor or outdoor (with sheltor)-10℃-50℃, Relative humidity:<=90%, no
condensation
Input InterfaceDry contact signal or +12V level signal or DC12V pulse signal with a width of
more than 100ms. Driving current: > 10mA
Working VoltageAC110/220 ±10% V/50 ±10% HZ (specify before manufacturing)
Motor TypeServo motor 24V 40W
Power Consumption5A
Weight40 kgs
JDGD-16 JDGD-18