Access Control System
KDH-KS2024-IP

 
KDH-KS2024-IP series standard controller is designed to be used in access control system, managed by KaDe Premium Plus II software. Standard con-trollers (unlike integrated controllers) are made in the form of modules, placed in metal enclosure with power supply. They are located in the protected area. Other system components (readers, electric locks, buttons) are installed next to the controlled door and connected to the controller. Such solution guarantees higher system security level, compared to integrated controllers. Readers can use any identification technology, provided they adopt Wiegand 26-40 bit interface. KDH-KS2024-IP model can handle: 2 door - two way 4 doors - one way


KDH-C100M

 
Proximity card readers type KDH-C100M are designed for use in access control systems. Models C100 can be installed inside or outdoors. They have housing made of ABS plastic. Readers are designed to work with controllers with Wiegand interface. The devices reads the card Mifare Classic (13.56 MHz). Switchable Wiegand format makes this product universal for various installations. The range of the proximi-ty card reading is from 2 to 5 cm depend of the model and type of card.


GUNNEBO SlimStile BA Lite

 
Key Specifications Flow Rates (approx): Proximity Reader “Hands Free” 40 passages per minute MCBF: 10M (12M if NO) cycles MTTR: Less than 30 min Casework: Galvanised painted steel 430 Casework Lid: Stainless Steel AISI 304 (1.4301 as for EN10088-1) Tripod Hub: Cast aluminium with painted grey finish Tripod Arms: 38mm dia. 480mm 304 Stainless Steel AISI 304 (1.4301 asfor EN10088-1) with welded end caps


GUNNEBO SlimStile EV

 
Key Specifications Flow Rates (approx): Insertion Type Reader 20 passages per minute Flow Rates (approx): Swipe Type Reader 30 passages per minute MCBF: 10M (12M if NO) cycles MTTR: Less than 30 min Casework: 304 grade grained stainless steel Casework Lid: 304 grade grained stainless steel Tripod Hub: Cast aluminium with painted grey finish Tripod Arms: 38mm diameter 480mm 304 polished stainless steel


GUNNEBO TriStile RO

 
Key Specifications Flow Rates (approx) Insertion Type Reader: 20 passages per minute Flow Rates (approx) Swipe Type Reader: 30 passages per minute Flow Rates (approx) Proximity Reader: “Hands Free” - 40 passages per minute MCBF: 10M (12M if NO) cycles MTTR: Less than 30 min Casework: 304 grade grained stainless steel Casework Lid: 304 grade grained stainless steel Tripod Hub: Cast aluminium with painted grey finish Tripod Arms: 38mm diameter 480mm 304 polished stainless steel


Tripod Turnstile JDGD-1

 
JDGD-1 is simple economical and compact equipment offering dissuasive automated access control for sites with heavy use. It is necessary addition to access control plan if effective security solution required. JDGD-1 is ideal for crowd management frequently used for factories warehouses, stadiums, amusement, parks, public transport stations. etc


STANDARD CONTROLLER KDH-KS2012-RS

 
KDH-KS2012-RS series standard controller is designed to be used in ac-cess control system, managed by KaDe Premium Plus II software. Standard controllers (unlike integrated controllers) are made in the form of modules, placed in metal enclosure with power supply. They are located in the protected area. Other system components (readers, electric locks, buttons) are installed next to the controlled door and connected to the controller. Such solution guar-antees higher system security level, compared to integrated controllers. Readers can use any identification technology, provided they adopt Wiegand 26-40 bit in-terface. KDH-KS2012-RS model can handle: 1 door - two way 2 doors - one way


Integrated access controller KDH-KS2000-IP-ELV

 
The KDH-KZ2000-IP-U_M controller has been designed for access control system and to be mounted on a wall without any additional enclosure. 32 bit processor ensures fast and reliable data processing. This is one door controller. With additional reader (also with keypad) it can use for two way control.It’s possibility to set one from four identification mode: Card only (default mode); PIN only; Card or PIN; Card + PIN KDH-KZ2000-IP-U_M can work in standalone (programming from keypad) or in network mode. In network mode it can work on-line or off-line with supervisor KaDe Premium Plus software II on PC.


Integrated access controller KDH-KAB200U-BLACK

 
The KDH-KAB200U-IVORY/BLACK is a single door wireless access control, consists of a wireless keypad, a mini controller and a wireless exit button. TEA + Rolling Code of encryption algorithm and the split design guarantees higher- secure. The keypad can store 500 PIN / card users. Because of ultra low power consumption, the keypad and the exit button can work as long as one year (bases on 30 times/day), with just 3 units of AAA batteries and 1 unit Li-battery. It will remind people to replace batteries intelligently if low battery.


Proximity card reader KDH-C130M-BLACK

 
KaDe 130 series readers replace 100 and 110 series readers in offer. Well known and accepted on the market design line (the same as KDH-C330-U/H/M and KDH-CK330-U/H/M) integrates excellent in every interior – traditional and more modern one. In addition to indoor usage KaDe 130 series readers can be used also outdoor. Durable ABS plastic housing and IP66 providing construction allow this feature. Readers are equipped with the most common Wiegand output interface. Connecting D0 and D1 wires responsible for data transmission to controller’s Wiegand input allows card numbers reading. This type of interface allows to use KaDe 130 series readers in majority of physical access control systems. Built-in signalers – buzzer and green-red LED, besides internal control by reader’s circuits during card reading have led out control lines, which can be connected to proper access controller’s outputs. This allows to generate sound and optical signals according to event type configured in access control system.


Proximity card reader KDH-CK330U/H/M -BLACK

 
KaDe 330 series readers present well known and accepted on the market design line, which integrates excellent in every interior – traditional and more modern one. In addition to indoor usage KaDe 330 series readers can be used also outdoor. Durable ABS plastic housing and IP66 providing construction allow this feature. Readers are equipped with the most common Wiegand output interface. Connecting D0 and D1 wires responsible for data transmission to controller’s Wiegand input allows card numbers reading. This type of interface allows to use KaDe 330 series readers in majority of physical access control systems. 330 series readers are multiformat readers. They work at 123 kHz and 13,56 MHz frequency, that allows card numbers reading in Unique (26 or 34 bits output), HID® Prox (26 or 37 bits output automatically switched) and MIFARE® (26 or 34 bits output) formats. This makes the system more flexible and allows more than one card standard usage in the same facility with physical access control. Built-in signalers – buzzer and green-red LED, besides internal control by reader’s circuits during card reading have led out control lines, which can be connected to proper access controller’s outputs. This allows to generate sound and optical signals according to event type configured in access control system. Additionally KDH-CK330U/H/M reader has built-in keypad. It has switched output format what allows usage in various access control systems (4 bit e.g. KaDe, 8 bit e.g. Kantech). Keypad allows other authorization methods than RFID identifier reading – PIN codes or combination of RFID identifier reading and PIN code usage.